Container Inspection & Prep

All containers must meet the overall external dimensions as standardized in ISO-668 requirement and the minimum internal dimensions and door openings for general purpose containers as standardized in ISO 1496-1.

Typical Equipment Specs 20′ Standard Container imp/metric 40′ Standard Container imp/metric 40′ High Cube Container imp/metric
Outside Dimensions

L x W x H

Length
20′ / 6.096m
Width
8′ / 2.438m
Height:
8.6′ / 2.591m
Length
40′ / 12.192m
Width:
8′ / 2.438m
Height:
8′.6″
/ 2.392m
Length
40′ / 12.192m
Width
8′ / 2.438m
Height
9.6′
/ 2.896m
Inside Dimensions

L x W x H

Length
19’4 7/32″ / 5.898m
Width
7’8 33/64″ / 2.350m
Height
7’10 11/64″
/ 2.392m
Length
39’5 23/32″ / 12.032m
Width
7’8 33/64″ / 2.350m
Height
7’10 11/16″
/ 2.392m
Length
39’5 23/32″ / 12.032m
Width
7’8 33/64″ / 2.350m
Height
8’10”
/ 2.693m
Door Opening

W x H

Width
7’8 3/64″ / 2.338m
Height:
7’5 49/64″
/ 2.280m
Width
7’8 3/64″ / 2.338m
Height:
7’5 49/64″
/ 2.280m
Width
7’8 3/64″ / 2.338m
Height
8’5 49/64″
/ 2.585m
Internal Capacity 1171ft³ / 33.2m³ 2389 ft³/ 67.6m³ 2693 ft³ / 76.3m³
Payload – Tare 5070 lbs /
2300kg
8690 lbs /
3940kg
9080 lbs /
4120kg
Payload- Cargo 38000 lbs /
17237 kg
44000 lbs /
19958 kg
44000 lbs / 19958kg

In addition, we require the containers to include the following:

  • An all wood floor in good condition
  • Lash rings at top left and right side to hang liner tight to ceiling.
  • Metal bar channel at front and rear door to place metal bars to secure load (2-1’/4″ channel).
  • Front lash ring or bar at ceiling to support bracing.
  • No holes or sharp indentations that may cause holes in the liner.